Krill Systems - Yacht Vessel Monitoring, Marine Security Alarm Systems, NMEA 2000

Sensors and Cables

Krill Sensor Cables are designed with individual connectors for each device to be monitored for maximum flexibility and ease of installation. The connector cable assemblies used are waterproof rated to IP67 with a temperature range of -20° to 105°C.

AC Sensor Kit

A single AC Sensor kit can monitor up to 2 independent AC sources. Each kit consists of a single AC voltage transducer that isolates and converts two AC voltage sources to a safe low voltage signal, 2 AC current transformers and two 5 meter cables.

DC Sensor Kit

Each DC current sensor kit can monitor up to 150A of DC current in both directions, suitable for measuring current from source devices such as chargers, alternators and loads such as inverters and other appliances. Utilizing Hall Effect Technology, these transducers are easy to install and provides isolated, non-contact DC current sensing. Each kit consists of a current transducer and 5 meters of cable.

House Battery Sensor Kit

A battery Sensor Kit utilizes the same DC current sensor as in the DC Current Sensor Kit, with the addition of an additional signal wire in the cable to sense the battery voltage. Each kit consists of a current transducer and 5 meters of cable.

Starting Battery Sensor Cable

Tank Sensor Cable

A single 5 meter cable connects one of the TSM1’s Tank ports to a resistive tank sender (not included) on your boats.

Please note that tanks senders are unique to each vessel, and is not included in the Starting Package. Your vessel must have any standard resistive senders such as those made by WEMA, VDO or Teleflex. Proprietary tank senders such as CompuTank, Centroid, Tank Tender or Snake River cannot be used.

Switch Sensor Cable

Sensor Cable

A single 5 meter cable connects one of the TSM1’s Switch ports to a voltage source to be monitored.